Sunday, June 23, 2019

June 2019 Minutes

The June 2019 meeting of the HPS was called to order at 7:00 P.M. on 3 June, 2019.  There were 11 attendees.  The  minutes of the May 2019 meeting were read and approved.

Old Business

Tom Clark gave the members a report on his visit to Wonderfest on 1 June in Louisville, Kentucky.  There were 840 entries which set record for the show.  A very impressive display, much use of 3D printing  and lots of electronics, lights, sound.

The subject of the trophy for the 'special category' at the IPMS nationals was discussed.  Initially the idea to use a trophy design similar to our 'best of show' was presented.  An alternate idea based on the 50 year marking of the Apollo landing on the moon was also presented.  This would utilize a representation of the Apollo command module with a photo of the moon landing and data on the capsule on a metal plate at the bottom.  This was the idea that was favored by the chapter and will proceeded with.

A club banner for our show and contest is moved forward with capability of being able to change the year display.

The numbering of the forms used to enter models in the chapter show and contest was brought to the floor.  There has been previous discussion regarding how to alter the forms such that the model does not have to lifted or moved to read the information on the forms.  After a bit of additional discussion it was decided leave the forms as is but look at the forms used by other chapters.  As to the numbering of the forms, the basic purpose of numbering the forms is give a count as to how many models were entered.  A suggestion was made that an entrant with multiple models could place the total number of models on on of the entry forms and then that number noted on a note pad by the chapter member working at the registration table.  The final decision was that the entry form would remain the same but that numbering each entry form maybe become optional.

The subject of the use of table risers was brought to the floor.  There were points, both pro and con, brought forward.  The final decision was made that observations regarding the use of table risers would made at the IPMS nationals.  A formal request that we not use table risers at our show was made by one of our chapter members.

New Business

  A request by our chapter president for judges for the model car contest that was part of the Mopar Club show at Huntsville Drag Strip was made.

   Mention was made of the meeting of the Marshal Space Flight Center Retiree's Association Meeting at MSFC on 13 Jul, the theme MSFC 1945-1975.

   Dan Thompson has been E-mailing newsletters generated by other IPMS chapters to our chapter members for quite a while.  As with many other entities there is both a beneficial aspect and a negative aspect.  The final outcome of a discussion on this subject was that should one not want to continue to receive these newsletters from Dan let him know and he will drop you from his mailing list.

   Our chapter president mentioned that at times, for whatever reason, conversations among chapter members will commence while an individual is giving a narrative on his work during Show and Tell.  Basically, his request was "please be courteous to the individual that is giving his narrative."

   There is apparently, in Huntsville, a group of individuals who build Gundam model figures.  They meet at the 'Lucky Dice Cafe'.  Meeting time is ever Tuesday night.

The June 'build night' will be 17 June, 6:P.M. to 8 P.M. at The Deep Comic Book and Game store.

Show and Tell 

Eli Geher - Manufacturers Promotional Model.  Restoration project for the Veterans Museum.  Prototype helicopter night vision system from Northrop Aviation.

Dan Thompson - Spaceship Pathfinder  Lengthened the 1/72nd scale Apollo 27 kit.


Andy Brezinski - 1/72nd Apollo 27 as a land speed-record setter.  Scratch-built cockpit painted and pilot prepared.


Bill Nichols - 1/72nd Italeri B-58 Hustler.  Scratchbuilt pilot, navigator, and weapon operator compartments. Scratchbuilt engine intakes and resin afterburner cans.  Natural metal finish by AK Interactive "Xtreme Metal" enamels.


Bruce O'Gorman - 1/6 scale Moebius 'Lost in Space' robot. 'LIS' robot added light and speech kit, glass bubble bolted to base with switches.  1/35 scale Apollo era M-113 escape/rescue vehicle.  Modified Tamiya M-113 kit for Apollo era configuration, fabricated speaker and exhaust.  1/24 scale AMT Dodge Shelby Charger, created decals.  1/32nd Revell Volkswagen with MENG WWToon Panther(Hitler's legacy, war and peace).  Modified Volkswagen, added Panther turret, machine gun, and accessories inside. Used decals from car and tank.




Blake Parker - Northrop Grumman Antares 230 1/100 scale AXM paper kit.  Fairly simple build.  Base is generic wooden shape from Hobby Lobby.  Model depicts NG-11 launch vehicle for S.S. Roger Chaffee launched in 2019 and currently berthed to ISS Node 1 Nadir CBM.  Space X Falcon m9 with Crew Dragon 1/00 scale Started with AXM paper kit, added metallic details with Molotow chrome pen on heatshield and engines. Windows were done with mylar film.  Sloar panels covered with clear packing tape and used vellum paper for grid fins.  Base is a generic Gundam base bought at The Deep Game and Comic Book store. Model depicts Space X DM-1 mission launched in March 2019.


Correction to May 2019 Show and Tell 

   M.E. Mueller - Completed 1/72nd scale Curtiss 81 'Tomahawk'.  This model was brought to April Show and Tell close to being completed.  Completed model was then displayed at May Show and Tell but not mentioned in the May 2019 meeting minutes.

No comments:

Post a Comment

HPMS Calendar